FALCON V3 BARİYER
Stok Kodu
197
Kategori
ENERGY: 200 - 240 V AC
MOTOR: 24V DC
POWER CONSUMPTION: 300 W
BODY: 1.2 mm, 304 quality stainless steel, 5 mm composite or 0.8 mm electrostatic paint on galvanized sheet.
WORKING TEMPERATURE: (-25), (+60) °C
DIMENSIONS: 25 x 40 x 100 cm
ARM LENGTH: 330 cm, 480 cm and 600 cm
REMOTE CONTROLLER: It can be controlled with a button (30m) or keyless (3m) remote control. With the keyless control module attached to the vehicle key ring or left at any point in the vehicle, when the barrier is approached 3m, the barrier recognizes the vehicle and passes without pressing any key. 1-500 button or keyless controls can be introduced to a barrier.
BUTTON CONTROL: The barrier also works with single or double button control. In single-button control, each time the button is pressed, the barrier makes its next move (closes if open, opens if closed). Double button control has separate buttons for opening and closing.
TIME CONTROL: If the barrier is required to close automatically after a certain period of time, there is a time control set for the desired time.
TRANSITION CONTROL: Dry contact is used for transition triggering.
SENSOR CONTROL: If the vehicle stops under the barrier arm during vehicle passage, even if it is triggered by any control unit to close, the down movement of the arm is prevented by the safety sensor. When the vehicle completes its transition, the system performs the shutdown process that it keeps in its memory. Additional safety sensors are used for trucks and trailers.
SMART ARM: The barrier arm has the feature of sensing the object touching it during its up-down movement and reacting accordingly. In cases other than the safety sensor, the time for the barrier arm to detect the material under it during the downward movement and to take the automatic upward movement is 0.7 seconds. During the upward movement of the barrier arm, the time to detect and stop the object in that direction is 0.3 seconds.
SYSTEM: The electronic circuit is designed as microprocessor controlled. Inputs for all optional products on it are ready to use. The system can be expanded at any time, at no cost, by attaching peripheral connections.
BATTERY: With the optional battery and battery charging unit, the barrier can open and close 250 times in case of power failure.
WARNING LAMP: During the up-down movement of the barrier arm, the flasher warning light on the device flashes until the arm completes its movement.
REFLECTOR: There is a reflector visible at night, red bands and "STOP" writing on the barrier arm.
EMERGENCY MODE: It is possible to control by connecting to security systems (automatic free passage position in case of emergency and fire alarm).
WARRANTY: 2 years
CERTIFICATES: ISO 9001:2008
MOTOR: 24V DC
POWER CONSUMPTION: 300 W
BODY: 1.2 mm, 304 quality stainless steel, 5 mm composite or 0.8 mm electrostatic paint on galvanized sheet.
WORKING TEMPERATURE: (-25), (+60) °C
DIMENSIONS: 25 x 40 x 100 cm
ARM LENGTH: 330 cm, 480 cm and 600 cm
REMOTE CONTROLLER: It can be controlled with a button (30m) or keyless (3m) remote control. With the keyless control module attached to the vehicle key ring or left at any point in the vehicle, when the barrier is approached 3m, the barrier recognizes the vehicle and passes without pressing any key. 1-500 button or keyless controls can be introduced to a barrier.
BUTTON CONTROL: The barrier also works with single or double button control. In single-button control, each time the button is pressed, the barrier makes its next move (closes if open, opens if closed). Double button control has separate buttons for opening and closing.
TIME CONTROL: If the barrier is required to close automatically after a certain period of time, there is a time control set for the desired time.
TRANSITION CONTROL: Dry contact is used for transition triggering.
SENSOR CONTROL: If the vehicle stops under the barrier arm during vehicle passage, even if it is triggered by any control unit to close, the down movement of the arm is prevented by the safety sensor. When the vehicle completes its transition, the system performs the shutdown process that it keeps in its memory. Additional safety sensors are used for trucks and trailers.
SMART ARM: The barrier arm has the feature of sensing the object touching it during its up-down movement and reacting accordingly. In cases other than the safety sensor, the time for the barrier arm to detect the material under it during the downward movement and to take the automatic upward movement is 0.7 seconds. During the upward movement of the barrier arm, the time to detect and stop the object in that direction is 0.3 seconds.
SYSTEM: The electronic circuit is designed as microprocessor controlled. Inputs for all optional products on it are ready to use. The system can be expanded at any time, at no cost, by attaching peripheral connections.
BATTERY: With the optional battery and battery charging unit, the barrier can open and close 250 times in case of power failure.
WARNING LAMP: During the up-down movement of the barrier arm, the flasher warning light on the device flashes until the arm completes its movement.
REFLECTOR: There is a reflector visible at night, red bands and "STOP" writing on the barrier arm.
EMERGENCY MODE: It is possible to control by connecting to security systems (automatic free passage position in case of emergency and fire alarm).
WARRANTY: 2 years
CERTIFICATES: ISO 9001:2008
Be the first to review this product!